fbpx
AuctionsDodgeMotorsports
Trending

The First 200 MPH Dodge Charger Daytona, Heads To Auction:

First Car To Hit 200 MPH Could Be Yours For The Right Price...

Over the week, there will be so many amazing Mopars going to auction at the 2021 Mecum Indy event. Among them, maybe one of the most important pieces of Dodge motorsports history. Many of you already know that the “winged warrior” was the first car ever to officially hit 200 mph on a closed racing circuit. But how would like to actually be the one to own “the” car that achieved it.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

This Chrysler “Development Car”, broke the record on March 24th, 1970 at the then newly opened Alabama International Motor Speedway (now known as Talladega Superspeedway) with NASCAR driver Buddy Baker at the wheel. Baker would set an official lap speed of 200.447 mph with the car, making the “aero wars” a full-on battle in the sport between Chrysler Corporation and Ford Motor Company.

The car originally started its life as a 1969 Dodge Charger 500 press car, before Nichels Engineering repurposed it as an aero test car. The project was overseen by Chrysler’s “Woodward Garage” race shop by Bob Tarozzi at the direction of Larry Rathgeb just as Charger Daytona’s development was getting underway.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

The car was simply known as the “Blue Car” according to the documentation of the test and later authenticated by Chrysler Racing Engineer George M. Wallace in 2001. The car wears the serial number “DC-93” and was originally raced in its Charger 500 configuration at the 1969 Daytona 500 by driver Paul Goldsmith before it was converted to a test vehicle.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

The car completed its first test with the Charger Daytona aero package at Chelsea Proving Grounds in July 1969. According to Wallace, the car hit 205 mph during that test. The Daytona package resulted in a zero-lift vehicle with a drag coefficient of 0.29. Pretty impressive, even for today’s standards.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

Additional testing at the proving grounds allowed for engineers to adopt several new innovations to the original car’s design. This included directional fins to direct airflow to the radiator, underbody paneling from the nose to the K-frame for better aerodynamics, and Chrysler Corporation’s first use of a dry-sump in NASCAR. Engineers also added engine bars from the shock towers to the firewall to help stiffen the chassis, while a refined cowl helped pull air at the base of the windshield.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

Engineers also improved the exterior aero by adding a rake to the chassis of 1.5-degreed and flared the quarter panels in front of the rear tires for better aerodynamics. 

In its first race as a Daytona, the car sat on the pole for the inaugural Talladega 500 in September 1969 with Charlie Glotzbach wearing the famous #88 colors. The car qualified with a speed of 199.446 mph, itself a world record. However, Glotzbach, along with most other drivers, sat out of the race due to a tire boycott. The pole speed had Chrysler engineers tap Baker to drive the car in a private test 6 months later, to see if they could break the 200 mph barrier.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

A handful of other famous drivers had their attempts behind the wheel of DC-93. That list included Bobby Allison, Dan Gurney, Bobby Isaac, and James Hylton. After its tour with NASCAR, the car was used by Iowa racer Don White in the USAC Stock Car competition. The car ended up being retired during the mid-1970s.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

It would be years until racing historian Greg Kwiatkowski was able to locate the car and purchased it from White in 1998. The car then went through a thorough multi-year restoration by legendary NASCAR crew chief and former Dodge Cup team owner Ray Evernham.

The Chrysler Engineering “Woodward Garage” #88 “DC-93” Dodge Charger Daytona. (Mecum).

During the restoration, the car was researched to make sure that the restoration could be as accurate to the original setup of the test car as possible. The car has a 426 cubic-inch HEMI EX-144 V8 featuring a Holley Dominator carburetor on a bathtub HEMI intake, good enough to produce 575 horsepower. The HEMI is mated to a 4-speed manual transmission with a Hurst shifter. The rest of the car features period-correct speed parts, paint, body parts, wheels, and even a Letter of Authenticity from Mr. Wallace verifying the car.

The car is set to roll across the Mecum auction block on Friday, May 21st. The car has lot number F186. For details on how to bid, you can visit Mecum.com. Mecum thinks the car could hit the $1 million mark during the auction.

Source: Mecum

The Chrysler Engineering #88 “DC-93” Dodge Charger Daytona Image Gallery:

This slideshow requires JavaScript.

Robert S. Miller

Robert S. Miller is a diehard Mopar enthusiast who lives and breathes all that is Mopar. The Michigander is not only the Editor for MoparInsiders.com, 5thGenRams.com, and HDRams.com but an automotive photographer. He is an avid fan of offshore powerboat racing, which he travels the country to take part in.

Related Articles

Loading new replies...

Dad said more than once he wished he'd bought one while they were "cheap" and put it on blocks in a barn.

Reply Like

Back to top button