What's new
Mopar Insiders Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

code HELP

lwlambert

New member
Joined
Jul 24, 2018
Messages
18
Reaction score
6
Points
3
Age
79
2006 4.7 liter . HELP with the following codes PO300, PO308, PO113, PO168
 
Assuming Grand Cherokee:

P0300 - MULTIPLE CYLINDER MISFIRE
P0308 - CYLINDER 8 MISFIRE
P0113 - INTAKE AIR TEMPERATURE SENSOR CIRCUIT HIGH

As for P0168, I can't find anything about that code. I'd verify to make sure that's the correct code.
 
Assuming Grand Cherokee:

P0300 - MULTIPLE CYLINDER MISFIRE
P0308 - CYLINDER 8 MISFIRE
P0113 - INTAKE AIR TEMPERATURE SENSOR CIRCUIT HIGH

As for P0168, I can't find anything about that code. I'd verify to make sure that's the correct code.
po0
 
P0068-MANIFOLD PRESSURE/THROTTLE POSITION CORRELATION
I replaced the 8th coil pack and plug but still seem like misfire or gas flooding when in park i gun the gas petal
 
I replaced the 8th coil pack and plug but still seem like misfire or gas flooding when in park i gun the gas petal
I‘m not an actual technician, I just have access to the service system to look up codes and other information. There are quite a few potential causes so I don’t want to tell you the wrong thing.

Have you taken it to a service center?
 
I‘m not an actual technician, I just have access to the service system to look up codes and other information. There are quite a few potential causes so I don’t want to tell you the wrong thing.

Have you taken it to a service center?
am thinking about going to cryler jeep service center and paying $125 for full diogonistic and detailed print out
 
Back
Top