fbpx
Abarth
Trending

Abarth 500e’s “Roar” Was Designed By The Stellantis Sound Design Studio

More Than 6,000 Hours Were Put Into It's Development...

Abarth continues to amaze and stir up the emotions of all the Abarthists worldwide with its Abarth 500e and its unique Sound Generator feature, making it one of a kind in the electric Hot Hatch segment. The new full-electric addition to the Scorpion range integrates an exclusive Sound System developed by a dedicated sound design team in collaboration with the Stellantis Sound Design Studios.

Abarth 500e inside the Stellantis NVH Lab. (Abarth).

The sound design, development, and integration were conducted at the Stellantis’ Italian Noise Vibration and Harshness (NVH) Department. The same entity that validated the sound of the historic Abarth exhaust system, the Record Monza.

The project lasted about two years, with approximately six months of continuous work. More than 6,000 hours were spent analyzing and creating the perfect sound for each phase of the driving experience with a team of several people involved in the project. The Technical Manager took care of the car area and focused on coordinating the various stakeholders. Additionally, NVH Specialists dealt with sound enhancement, concentrating on the creative and technological parts of the good creative process. They worked on the sound and demo development as well as on the different steps of sound looping, from software development to the creation of the sound itself.

Abarth 500e inside the Stellantis NVH Lab. (Abarth).

Part of the sound tests and studies were conducted in a semi-anechoic chamber – a room specifically designed to have extremely low noise levels inside and a high degree of acoustic insulation from the exterior – to make accurate and reliable noise measurements. Thanks to the reflecting floor, it is possible to recreate an acoustically reflecting surface, just like a road. In addition, specific features make the semi-anechoic chamber perfectly quiet, thus allowing the sound specialists to discriminate the noise from the whole surroundings.

To achieve a perfect output as close as possible to the original one, the current sound of the Abarth turbocharged engine was recorded throughout all the different phases of the driving experience—acceleration, deceleration, braking, fast cornering, and much more. Moreover, specific sound calibrations were carried out. The recordings were then carefully analyzed through dedicated technical tools and processes to extract all the distinctive Abarth frequencies, which is essentially its DNA, to create a new tone in a virtual matrix enriched by additional sounds.

Abarth 500e inside the Stellantis NVH Lab. (Abarth).

The matrix was tested offline in the studio and on the static car through various iterations and configurations to achieve the perfect blend of the output. Specifically, thanks to software, the matrix adapts the multiple components of the recorded sound to achieve the best immersive result for the driver. Additional sounds were layered upon the matrix to blend the historic sound of Abarth with the feeling of the future found on the Abarth 500e.

The important point was to balance the Sound Generator carefully to provide the driver with the most pleasant driving experience even at high speeds, respecting the homologation constraints for noise pollution and ensuring a realistic sound. Therefore, the intensity of the Sound Generator System is directly proportional to the rate at which the car is driven, and the sound is processed differently through the exterior rear speaker. It ranges from IDLE, where the engine is at its lowest power and the sound generator replicates the sound of the Record Monza exhaust at idling speed, to SIGNATURE, which alters based on one’s rate, maintaining the timbre typical of the Abarth with the internal combustion engine. In short, SIGNATURE contains all the information we give to the amplifier – from idle to progressive speed, ignition, and shutdown.

Abarth 500e inside the Stellantis NVH Lab. (Abarth).

The Abarth 500e can offer all the features of a luxury car in just 3.6 meters without giving up on the irreverence inherent in the DNA of the Brand. Thanks to the Sound Generator, it is the only Hot Hatch capable of evoking the sound of the historic internal combustion engine (ICE) and providing the acoustic power of a sporty ICE engine that reaches the limits allowed by homologation regulations.

The Abarth’ roar’ of the Sound Generator can be turned on-off by the driver when the car is stopped through the cluster settings.

Source: Abarth

Robert S. Miller

Robert S. Miller is a diehard Mopar enthusiast who lives and breathes all that is Mopar. The Michigander is not only the Editor for MoparInsiders.com, 5thGenRams.com, and HDRams.com but an automotive photographer. He is an avid fan of offshore powerboat racing, which he travels the country to take part in.

Related Articles

No replies yet

Loading new replies...

Abarth 500e’s “Roar” Was Designed By The Stellantis Sound Design Studio​

More Than 6,000 Hours Were Put Into Its Development...​

1681504227801.png

Abarth continues to amaze and stir up the emotions of all the Abarthists worldwide with its Abarth 500e and its unique Sound Generator feature, making it one of a kind in the electric Hot Hatch segment. The new full-electric addition to the Scorpion range integrates an exclusive Sound System developed by a dedicated sound design team in collaboration with the Stellantis Sound Design Studios.

Reply Like

click to expand...
Back to top button