Mopar Insiders Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Meet The Company Building HELLCAT Rebel TRX Replicas:

IMG_2541

Ram Rebel TRX replica (US Truck Sales)

This will be running on our front page tomorrow, but our forum members get an early peak. I've got a sneaky suspicion that @VoiceOfReason and @devildodge are going to be all over this one. ;)

A few months ago I was approached by US Truck Sales on our Instagram page for 5thGenRams. They were looking for some information on the all new 2019 Ram 1500. During our conversation they mentioned that they have been building HELLCAT powered Rebel TRX replicas and some cool other builds. I asked them if they would send me a little write up about themselves and their builds. This is what Thinus from US Truck Sales had to say:

"We specialize in changing the Rams over to Right Hand Drive and back in 2005 we basically started the business because I really badly wanted an SRT10 Viper truck for myself and figured if we sold a couple in South Africa I could save a little on my own truck.

Since then we have changed more than 300 trucks over to Right Hand drive.

A big spinoff from this business was obviously that each new owner wanted to individualise their trucks and we started customising vehicles with lift kits, suspensions, body kits, and engine and drivetrain mods. We also realised in 2014 when Ram Trucks released the RAM 392 concept truck that a lot of the previous SRT10 owners was pretty hungry for a performance version of the RAMS and we decided to start with our own SRT version by fitting SRT8 crate motors into the Rams for customers. The package not only included the engine but we upgraded the brakes by fitting bigger front rotors and callipers supplied by SSBC. The exhaust system also gets a custom set of headers and 76mm exhaust system. We had to remove the speed limiter on the vehicle and this was done with Diablo’s products, also allowing us to load custom software for the 6.4 Engine.

Ram Rebel TRX replica (US Truck Sales)

The trucks worked very well as the truck still looked OEM and everything functioned like it should. It became a very popular option as it made the trucks lighter on fuel and added quite a bit of power. We then built a few special regular cabs that had some additional work done to the crate motors supplied by Modern Muscle. These had camshafts, flowed heads, Mahle Pistons and valvetrain to match and produced quite a lot of power. With the 8 speed 8hp70 transmissions these trucks would outrun a stock SRT10 with ease and yet made the trucks fun to drive and very much everyday drivers.

Then came the Hellcat cars and I often wondered if it would be possible to fit the Hellcat motor to the RAM. Finding a Hellcat motor proved to be quite a problem however and in the beginning any Hellcat wrecks were scooped up very quick and prices for Hellcat drivetrains would be as much as $35 000, making it simply too expensive. Then during 2017 Dave Weber from Modern Muscle advised that he could help with a Hellcrate motor and we decided that we should pull the trigger on this build…

Ram Rebel TRX replica (US Truck Sales)

The crate motor arrived on 5th April 2017 and it was quite exciting to uncrate that and see that emblem on the supercharger! We did not have the privilege to drive Hellcat powered cars in South Africa so it was the first time we got to see it up close and personal. The truck that we were going to fit it into arrived on 10th April 2017 and we could finally start with the process.

Since we had done quite a few 6.4 swaps it was not a huge problem getting the engine fitted. The block is exactly the same and we fit the motors using OEM mounts and on the first truck also used the stock 8HP70 transmission so mating the engine and transmission was straightforward. There was some clearance issues with the supercharger cooling system pipes and we had to re-engineer some fittings.


There are some obvious changes that had to be made and we used a Hellcat PCM that had to be reprogrammed to work in the RAM as well as some changes to the wiring and programming of other modules in the truck.

The truck pretty much fired up on the first try, but we still did quite a bit of development work on the supplementary cooling system for the Supercharger.

Then RAM released the TRX concept and we had so many requests for this truck that we simply had to attempt this build.

We first built a used, accident damaged truck as it needed a suspension and a stack of body panels anyway. The truck really looked awesome and the Dirt King Fabrication suspension worked really well.

Ram Rebel TRX replica (US Truck Sales)

Obviously we had to combine these trucks… we had to build a TRX replica with Hellcat power. We did the first white one and it was absolutely stunning but the truck still limited the engine power because of the transmission limiting the torque output at full throttle. The second truck we built we decided to mate the transfer case to the 8HP90 transmission from a Hellcat powered car. This made a huge difference and the truck really performs well.

So that is basically the short version of how the Hellcat powered Rams came to life. We have had something like 147 000 views on one of the videos on Youtube and we have had some really positive comments on the trucks.

I think it will be very popular when FCA finally builds the real one, but they must not limit the HP!!!

Regards
Thinus"


I'd like to thank Thinus for sending the information and photos over. They are doing some really cool stuff down there, make sure you check out their website and YouTube channel for more.
 

redriderbob

Mopar Guru!
Staff member
Joined
Apr 21, 2018
Messages
5,110
Reaction score
3,760
Location
Metro Detroit
Agreed. I'm surprised no North American company seems to be doing this, I know prefix makes the Minotaur but I haven't seen anyone else doing something close to a TRX replica such as these.

Why spend the money on development, when the manufacturer will be launching one soon.
 

devildodge

Well-known member
Joined
Apr 24, 2018
Messages
419
Reaction score
449
Location
Central Pennsylvania
Yeah that is pretty awesome. Very interesting. Reminds me of the trucks used in Monster Trucks. Very interesting, good movie too.
 

VoiceOfReason

Member
Joined
Apr 24, 2018
Messages
89
Reaction score
57
LOL - I thought I had responded to this - might have been in a hurry and wasn't logged in. I shared the article to my Facebook TRX group. Yes, very cool, but, it's on another continent, and the real McCoy is on it's way. I pestered Prefix about a more TRX focused Minotaur and as you can imagine, they'd be delighted to build one, but . . . that $100,000+ for a non-factory ride was just a bridge too far for me. My goal was to start with a late model Rebel and go from there because I like the look of the Rebel front end more than the Minotaur, but a custom special order Rebel is already well over $50,000. The Minotaur suspension doo-dads are somewhere in the $20,000 range if I recall and we haven't even ordered the Hellcat engine, 8HP90 trans, and who knows what else would be needed beyond the trans to not leave metal parts all over the place after one too many stomp-a-thons. Had FCA come out and said they were decidedly never going to build a TRX, that would be one thing, but with the hope that they someday might (and there were plenty of clues that they were not ignoring the public outcry), there was no reason to jump the gun. Now that they went public with the news that it's coming, interest in a knock-off have plummeted to near zero for me.
But, if drastic fortune changes were to lie ahead, I'd stuff a Redeye engine in a Prefix all day long - even if I had to buy the whole car to get it - sacrilege, I know, but we're in fantasy land here, so I'd just buy two Challengers.
 
Last edited:

Users who are viewing this thread

Top